Fiberglass Roving For Pultrusion
CYC Fiberglass roving for pultrusion is coated with suitable silane
sizing which is compatible with unsaturated polyester(UP), vinyl
ester (VE), epoxy (EP) and phenolic resin etc. Due to its good
abrasion resistance, excellent mechanical and high electric
insulation performance properties, it is suitable for manufacturing
FRP pultrusion products particularly, such as fiberglass rebar,
profiles, rods, tubes, cable trays, ladders, beams, sheets,
insulation cord rod and so on.
a. Excellent Mechanical properties.
b. Good Concentration and Tapability
c. Good Compatibility with Epoxy Resin
d. Excellent Electrical Insulation Perfromance
e. Excellent Abrasion Resistance
TYPICAL PRODUCT SPECIFICATIONS:
|Product Code||Filament Diameter (μm)||Linear Density (tex)||Tensile Strength (N/tex)||Moisture Content (%)||Loss On Ignition (%)||Compatible Resin|
|13~24||600, 1200, 2200, 2400, 4400, 4800, 8800, 9600||≥0.40||≤0.10||0.55±0.15|
|13~24||600, 1200, 2200, 2400, 4400, 4800, 8800, 9600||≥0.40||≤0.10||0.55±0.15||EP|
The roving bobbins are packed by standard export pallet.
|Bobbin Height (mm)||260||260|
|Bobbin Inside Diameter (mm)||160||160|
|Bobbin Outside Diameter (mm)||270||310|
|Bobbin Weight (KG)||16||22|
|Number of Layers||3||4||3||4|
|Number of Bobbins per Layer||16||12|
|Number of Bobbins per Pallet||48||64||36||48|
|Net Weight per Pallet (KG)||768||1024||792||1056|
Fiberglass roving should be stored in its original packing in a dry
and cool place. Best conditions are at temperatures from 15℃ to 35℃
and humidity between 35% to 65%. To ensure safety and avoid damage
to the product, the pallets should not be stacked more than three
layers high, when the pallets are stacked in 2 or 3 layer, care
should be taken to correctly and smoothly move the top pallet.
Unless otherwise specified, the roving should be stacked in dry and
cool place, do not open the package before use.